- Home
- Rainwater Harvesting Accessories
Rainwater Harvesting Accessories
We offer a range of rainwater harvesting accessories, including: waterbutt accessories, rainwater harvesting valves, water butt treatment, pipe linking kits, and more.
Valves
A valve allows you to ensure that you always have water in the water butt, even if it hasn’t rained. The valve pulls in mains water as a backup to achieve this.
Taps
These are taps to be fitted to a water butt. Although these may come with the butts, they don’t always. You may also prefer to pick out the one you like individually rather than taking the one which comes with the butt.
Water Butt Treatment/Cleaner/Freshener
Sometimes filters are not enough to purify the water to the level you require. Algae, slime, scum and unpleasant smells can remain. When this occurs, it’s advisable to use water butt treatments, cleaners or fresheners. To use, simply pour the specified amount of treatment into the water butt. More info can be found here.
Pipe Linking Kits
If you want to add more storage capacity to your rainwater harvesting system without replacing your existing water butt, you can use a pipe linking kit to connect this butt to a second one. This will cause the butts to fill one after another. Theoretically, as space permits, you could add as many water butts as you like to your rainwater harvesting system to achieve the capacity you require.
Click here if you are interested in our rainwater harvesting packages
Manhattan Water Butt Stand 100 and 200 litre
£59.00
Limited offer: Buy one item from the Prestige Water range and receive 10% off a second prestige item. (Lower priced item will be discounted). This water butt stand is suitable for the Manhattan 100 and 200l water butts. The Manhattan water butt is equipped with a bottom outlet which can be used to optimise the tank capacity. By using a stand to ...
MDPE Stop Cock 20mm x 20mm, 25mm x 25mm
£9.99
Durable polypropylene compression fitting connector for use with MDPE (medium density polyethylene) pipe. Excellent performance under pressure. Suitable for underground cold water systems. Highly impact-resistant nut and body absorb high levels of thermal and mechanical stress. Simple and quick to connect and disconnect. Always use with pipe ins...
MDPE Wall Plate Elbow 20mm x 1/2", 25mm x 3/4"
£5.99
MDPE Wall plate elbow allows you to connect your tap/valve directly to a wall. Excellent for your rainwater harvesting pump. Durable polypropylene compression fitting connector for use with MDPE (medium density polyethylene) pipe. Excellent performance under pressure. Suitable for underground cold water systems. Highly impact-resistant nut and ...
Multi-jet Magnetic Water Meter
£79.00
Features:• Only one moving part - the impeller - in contact with the water for minimum wear and utmost reliability• Magnetically driven sealed registers. Stainless steel/glass encapsulated option is unconditionally guaranteed against fogging• Wide selection of dial configurations (3 pointers; central pointer) and units of measurements• Optional ...
Outlet Flap Valve, Anti Flood Non-Return Valve
£69.00
Please note there are two versions of this valve, this is the outlet flap valve suitable for placing onto the end of plain ended pipe. The Inline flap valve version can be found here. Non Return Valves for drainage and water pipes, available in two sizes 110mm and 160mm. Slips onto the end of pipes. Effective Anti-flood Valve and Rat Barrier Dr...
Prestige 225 Wood Effect Water Butt Stand
£69.00
Limited offer: Buy one item from the Prestige Water range and receive 10% off a second prestige item. (Lower priced item will be discounted). This water butt stand is suitable for the Prestige 225 Wood effect water butt. By using a stand to raise the water butt, this allows a watering can to be placed underneath the tap for easy filling and use...
Prestige 250 Classic Water Butt Stand
£99.00
Limited offer: Buy one item from the Prestige Water range and receive 10% off a second prestige item. (Lower priced item will be discounted). This water butt stand is suitable for the Prestige 250 Classic water butt. By using a stand to raise the water butt, this allows a watering can to be placed underneath the tap for easy filling and use the ...
Prestige Plug and Go Pump to tank linking kit
£29.00
Prestige Plug and Go Pump to tank linking kit allows the Prestige Plug and Go Pump to connect a water source. The Prestige Water Range all have a 3/4" BSP drawdown connections at the base of the tank. The linking kit includes a mini ball valve, a 1m length of suction hose and the female connection to connect to the pump inlet. The mini ball v...
Prestige Rainwater Cartridge Filter Trio
£99.00
The Prestige Rainwater Trio self is perfect for high level filtration in rainwater harvesting and other water purification applications. Prestige Rainwater Trio has three 10" cartridge filters in series: first stage with a stainless steel net cartridge and filtration degree of 60 micron. second stage refines the filtration to 20 micron t...
Prestige Water brass water butt tap with snap lock adaptor
£19.99
Prestige Water brass water butt tap is the standard tap accross our Prestige Water butt range. The inlet to the tap is available in either 1/2" BSP , 3/4" BSP or 1"BSP. Need to check BSP sizing? Use our handy BSP sizing table. The outlet is 1" BSP and the tap is supplied with : a 1/2 " brass snap lock connector for standard garden hose appl...
Prestige Water Butt sight level indicator tube
£19.99
Limited offer: Buy one item from the Prestige Water range and receive 10% off a second prestige item. (Lower priced item will be discounted). This nifty little device allows the level of water in any water butt to be determined. A common issue is not knowing the amount of water in a water butt or tank and not being able to plan accordingly with...
Prestige Water Butt Spares
£3.99
The Original Prestige Wall Mounted Water Butt is a novel, simple, British designed and manufactured water butt perfect for the garden. If you wish to re order any of the free issue spares please simply select the item you require, likewise sample colour swatches can also be purchased : Top Cap (planter access 4",100mm, black) PLEASE NOTE. Pr...
Prestige Water Mains Back Up - AB air gap enclosure
£109.00
Mains Back up - AB air gap kit, suitable for fitting on existing tanks to ensure an air gap is available between the mains water and the maximum possible water level. By seating the mains back up above the tank: More of the available main tank capacity can be used The mains top up device (e.g. RainAid, Solenoid) is easily accessible without e...
Pump to Tank Connector
£69.00
This superb connector allows the tank to be shut off without any loss of water. The connector hose can then be easily disconnected at either end. Comprises two flat seals in brass, 1m of quality flexible PVC suction hose and 1 brass shut off ball-valve. Connect any water-butt/tank with a 3/4" BSP port to any pump with 1" BSP threaded inlet. A pe...
PVC Bulkhead fitting tank to tank connector
£14.99
This bulkhead allows both PVC (glue) and threaded fittings to be connected to a tank and also allows tank to tank connection. The bulkhead fitting is made out of PVC-U, has a glue socket at one end and at the opposing end a male and female thread. The fitting is suitable for up to 10 bar.
Quickstop advance float valve
£40.99 £44.99
Designed as a replacement to conventional ballcock valves in water tanks to protect booster pumps, the Quickstop goes instantly from fully open to fully closed, preventing repeated stop/start cycling of pumps when filling tanks or cisterns. QuickStop has a very high flow rate allowing rapid filling with minimal pressure loss. Available in sizes:...
RainAid RA20 Rainwater Harvesting Top Up Valve (Mains Backup)
£99.00
The RainAid RA 20 is a complete revolution as a means of mains back up for tanks and butts. The valve operates in a similar way to a float valve but rather than using a float, the valve uses a neutral weight. When the water level drops in the tank the valves open allowing the bottom of the tank to be filled to a level defined by the user...
Rainwater Harvesting Adhesive Labels Sticker Pack
£5.99
Rainwater Harvesting Warning Label Pack as stipulated in BS8515. . These labels help clearly identify rainwater supplies in the home and garden and are typically required for your rainwater harvesting installation in accordance with the requirements of BS8515. The labels are printed on heavy duty vinyl and are suitable for outdoor use. The...
Ribbed water butt diverter hose extension
£3.00
The majority of our diverters and filters our supplied with 30-50cm hose to connect the filter/diverter to the water butt. Occasionally your water butt may be greater than this distance from the downpipe and so we have a range of hoses to allow a greater separation between water butt and downpipe diverter. Ensure the extension pipe is laid leve...
Spiral suction hose PVC
£4.00
Spiral suction hose with reinforcement suitable for 0.65 to 6 bar applications. Suitable for suction end of pump network and delivery line as the hose will not collapse under negative pressure. Price given per metre.
Surface Mounted (Hozelock/Snap-lock) Hose Connection Box
£89.00
For the convenient extraction of rain water in the garden. For jet pump and submersible pump incl. 2-way valve and 1'' hose tail connection. Made of robust and weather-resistant plastic Ideal addition to the complete packages Garden Comfort, Eco Plus and Professional Available in two options : External Internal, flush with lid suitable for a...
Tank Ball Valve
£45.00
This ball valve type is suitable for all types of water applications or installations with a working temperature from 0°C to +75°C . Working pressure for this ball valve is up to 16bar. The ball valve comes with a reinforced handle and come with PTFE seals. The body of the ball valve is black.
Tank connection grommet for pipe ID 25mm, 32mm, 40mm, 110mm and 160mm
£4.99
Rubber inlet seals are used to seal inlet and outlet pipework into the tank, A hole is cut, the grommet is inserted, the pipe is inserted into the grommet to form a seal. These grommets are suitable for open pipe, drainage and low pressure applications.
Vehicle module plate for Compact Tank 1000l
£179.00
Vehicle module plate for Compact Tank 1000l This vehicle lid plate is suitable for: - 1000l compact tank
Visible ball rain water and tank level indicator
£169.00
This clever yet simple device allows the level in a tank to be visually inspected at a distance. Unlike many water level indicators which require being close to the tank the highly visible ball can be seen at some distance, making inspection a quicker task. The Innovative uni-ball joint will suit any tank installation regardless of roof angle....
Ward Water butt connector - optional 3m extension hose
£10.99
Strata Ward Water Butt Filler Kit This is Strata Ward Water Butt Filler Kit which showcases innovative UK design. This item diverts the rainwater direct from your downpipe into your water butt to keep it full! To fit standard round and square down pipes up to 68mm outside diameter The Kit contains the following items: 1 x Downpipe rainwater...
Water Butt overflow outlet
£3.99
If you're connecting your downpipe directly into your tank or water butt you'll need to ensure you have some way of discharging flows when the level reaches the top of the tank otherwise water will spill from the tank in all directions! The overflow can be directed into drain, another tank or another area of the garden or raised bed. An easy way...
Water butt tap or hosetail flat drill bit
£4.49
Here we have the two most common drill bits used in garden rainwater harvesting. The 26mm flat drill bit is used for connecting the majority of water butt taps (3/4" BSP) and the water butt connector hosetails to the water butt. The 32mm flat drill bit allows a 1" threaded hosetail to be fitted to a water butt. If you're already buying a wate...
Water Tank/Butt and IBC Connector - Pipe Link Linking Fitting Kit
£10.99
Use this set to link water butts together so they fill either sequentially or in parallel, allowing you to add capacity to your system. Linking water butts at the top means water will overflow from the 'source water butt' into the receiving water butt. The first water butt will fill then the 2nd, then the 3rd and so on. In this set up each wate...
Watering Posts Original, Natural, Wood
£99.00
Watering Posts allow watering points to be set up around the garden. This prevents dragging a hose around and potentially damaging delicate plants and flowers. Watering posts also mean heavy watering cans don't have to be carried the full length of the garden. The post is also suitable for pressurised rainwater from a waterbutt (pump required...
White PTFE Thread Seal Tape
£0.99
All threaded fittings are ideally fitted with PTFE. PTFE provides a watertight seal for water-pipe fitting and installation work. Helps prevent bi-metal corrosion in threaded joints. Lubricates threaded joints during assembly and helps prevent bi-metal corrosion. Suitable for cast iron, steel, alloys, plastic, brass and ceramics. Length 12m, w...